Set Up And Connect To The Internet - Zte AT&T Velocity MF923 User Manual

Set Up and Connect to the Internet

Install the Battery
Remove the back cover.
Insert the battery.
Replace the back cover.
Installing a SIM card
Your new Mobile Hotspot SIM card is
pre-installed. If you are an existing AT&T
customer, replace it with your current SIM
(see instructions below).
Open the SIM card slot cover.
Insert the SIM into the slot with the
gold-colored contacts facing up.
Close the slot cover.
If your SIM does not fit, call Customer Care at 800-331-0500.
Enter your mobile number, select the option for Technical
Support, and then follow the prompts to speak to a
representative.
Insert a microSDHC card (optional)
Open the card slot cover.
Insert the microSDHC card into the slot.
Close the cover.
8 AT&T Velocity – User Guide – Prepaid
Charging the battery
The battery is pre-charged. You can recharge the battery from a
wall outlet or from the USB port on your computer.
To recharge the battery from a wall outlet (faster option):
Attach one end of the micro USB cable to the mobile hotspot
and attach the other end to the wall charger (included).
Plug the wall charger into a wall outlet.
The battery icon on the LCD screen indicates when the battery
is fully charged (
To recharge the battery from the USB port on your computer:
Attach one end of the micro USB cable to the mobile hotspot
and plug the other end into the USB port on your computer.
The battery icon on the LCD screen indicates when the battery
is fully charged (
Get Started Get Started
) and the LED changes to steady green.
) and the LED changes to steady green.
AT&T Velocity – User Guide – Prepaid
Return to Menu
9