General Operation; Switching On/Off; Volume; Overview Of The Menu Operation - Blaupunkt Casablanca 2012 Operating Instructions Manual

Table of Contents

Advertisement

General operation

Switching on/off

Switching on/off with the On/Off button
u For switch-on, press the On/Off button 
The car sound system switches on.
u To switch off the device, press and hold down
the On/Off button 
onds.
The car sound system switches off .
Notes:
• When you switch on the car sound system
for the fi rst time after connecting it to the
power supply, the CPU loads all the data.
Afterwards, the car sound system switches
off . The loading process is not shown on
the display.
• If you switch on the car sound system while
the vehicle ignition is switched off , it auto-
matically switches off after 1 hour to pre-
serve the vehicle battery.
Switching on/off via vehicle ignition
If the car sound system is connected to the vehi-
cle's ignition and you did not switch the device off
by pressing the On/Off button
on or off with the ignition.

Volume

Adjusting the volume
You can adjust the volume in steps from 0 (off ) to
50 (maximum).
u Turn the volume control 
volume.
Muting the car sound system (Mute)
u Briefl y press the On/Off button
the car sound system or to reactivate the pre-
vious volume.
While it is muted, the display shows "MUTE".
8
8
for longer than 2 sec-
8
, it is switched
9
to change the
8
to mute

Overview of the menu operation

The following buttons are required to operate the
menu:
To call up or close the menu,
u briefl y press the
.
To select a menu item,
u turn the volume control
u Press the
menu item.
To change the fl ashing setting of a menu item,
u turn the volume control
The setting is immediately eff ective and auto-
matically stored.
Notes:
• The menu is automatically exited approx.
10 seconds after the last button activation
and you are returned to the display of the
current audio source. The last setting is au-
tomatically stored.
• You can press the
case to return to the higher menu level.
Changing the presetting of the
power-on volume
The car sound system is factory-set so that it plays
back the volume with a value of 20 upon switch-
on. You can set the power-on volume in the menu
so that the playback after switch-on always starts
with the previously selected volume.
u Briefl y press the
the menu.
u Turn the rotary control
menu item is selected.
u Press the
u Turn the rotary control
menu item is selected.
u Press the button
setting.
u Turn the volume control
tween the settings "ON" and "OFF".
General operation
5
button
.
9
.
4
button
to open the selected
9
.
4
button
5
button
9
until the "VOL"
4
button
to open the submenu.
9
until the "LASTV"
4
to change the selected
9
to change be-
in each
to open
5

Advertisement

Table of Contents
loading

Table of Contents