Installing Your New Appliance - Hisense RF697N4ZS1 User's Operation Manual

registered electrician or replace it in accordance
with the "cleaning and care" chapter.
The refrigerant and risk of fire
The appliance contains a small
quantity of refrigerant (R600a) in the
refrigerant
compressor label on the rear of the appliance to
see which refrigerant is used for your appliance.
If the appliance contains iso-butane (R600a)
refrigerant, which is environmentally friendly but
flammable, ensure that tubing of the refrigerant
circuit is not damaged during transportation and
installation to avoid risk of fire caused by leaking
refrigerant.

Installing your new appliance

This chapter tells you how to use most of the
useful features. Before using the appliance for the
first time, we recommend that you should be
informed of the following tips.
Ventilation of appliance
For proper
refrigerator must be placed on a
level surface of hard material that
is the same height as the rest of the flooring. This
surface should be strong enough to support a
fully loaded refrigerator, or approximately 266 lbs
(120 kg).
√
To protect the integrality of the flooring, cut a
large section of the cardboard carton and place
under the refrigerator where you are working.
When moving, be sure to pull the unit straight out
and push back in straight.
circuit. Check the
installation, this
Hisense Refrigerator
Keep burning candles, lamps and other items
with naked flames and sources of ignition away
from the appliance and ventilate the room
thoroughly to avoid the risk of fire and eye injury
should any leakage of refrigerant (R600a) exist.
Do not store products which contain flammable
propellants (e.g. spray cans) or explosive
substances in the appliance.
The room space must be at least 1m³ per 8g of
refrigerant (R600a). The amount of refrigerant in
your appliance is indicated on the rating plate
inside.
In order to improve efficiency of the cooling
system and save energy, it is necessary to
maintain good ventilation around the appliance
for the dissipation of heat. For this reason,
sufficient clear space should be available around
the refrigerator.
at least 100mm
at least100mm
Suggestion: It is advisable for there to be at
least 75mm of space from the back to the wall, at
least 100mm from its top, at least 100mm from its
side to the wall and a clear space in front to allow
the doors to open 155°. As shown in the following
diagram.
3
at least 100mm