Resetting To The Factory Settings - Sony NWZ-WS613 Help Manual

Help Guide
How to Use
Digital Music Player
NWZ-WS613/WS615

Resetting to the factory settings

Your Walkman can be reset to the default settings. Resetting the Walkman will not delete content such as music.
If you reset your Walkman, the pairing information of the Remote Commander and the other Bluetooth devices is
deleted.
1. Check that the playback is paused and the Bluetooth function is turned off.
2. Press and hold the Next button (
button ( ) on the left (
When resetting is completed, the lamp (
Note
To pair your Walkman to the Remote Commander again, press the button (
for 7 seconds and turn the Remote Commander on. Pairing starts and the lamp (
Walkman blinks in blue and red. When the pairing is completed, the lamp (
Related Topic
Resetting your Walkman
Formatting memory
Confirming the Walkman status by the OPR lamp
) on the right (
) side of your Walkman.
) on the right (
Copyright 2014 Sony Corporation
) side of your Walkman for 15 seconds while pressing the
) side of your Walkman blinks in green twice.
4-536-927-13(1)
) on the left ( ) side of your Walkman
) on the left ( ) side of your
) blinks in blue.
102