Samsung RF22 Series User Manual page 13

2. Insert and tighten the 2 hex head bolts into the
left and right middle hinges with an allen
wrench.
3. Replace the middle hinge cap.
4. Place the hole in the bottom of the left d oor
over the middle hinge.
5. Position the top table in place. Insert and
tighten the 3 screws into the top table with a
philips screwdriver(+).
6. Insert the left upper hinge shaft into the hole on
DA68-02787D.indb 13 DA68-02787D.indb 13
Top Table Top Table
the corner of the fridge door.
7. Insert the upper hinges into the holes at the top
of the door.
Insert and tighten the 3 hex head bolts into the
left and right upper hinges with a socket
wrench.
8. Insert and tighten the ground screw into the left
and right upper hinges with a philips
screwdriver(+).
ground wire ground wire
9. Connect the electronic wire on the top of the
refrigerator.
setting up _13
2012.11.23 2:39:5 PM 2012.11.23 2:39:5 PM