Panasonic DMC-G7K Basic Operating Instructions Manual page 53

Striping or flicker may appear under lighting such as fluorescent lighting and
LED lighting fixture.
•
This is characteristic of MOS sensors which serve as the camera's
pickup sensors.
This is not a malfunction.
•
Are you taking pictures with the electronic shutter?
> When using the electronic shutter, lowering the shutter speed may
reduce the effect of the horizontal stripes.
The brightness or the hue of the recorded picture is different from the actual
scene.
•
When recording under fluorescent or LED lighting fixture, etc., increasing the shutter speed
may introduce slight changes to brightness and colour. These are a result of the characteristics
of the light source and do not indicate a malfunction.
•
When recording subjects in extremely bright locations or recording under fluorescent lighting,
LED lighting fixture, mercury lamp, sodium lighting, etc., the colours and screen brightness may
change or horizontal striping may appear on the screen.
4K photo recording stops before finishing.
•
When the ambient temperature is high or recording with [
([4K Burst(S/S)]) of the 4K Photo function is performed continuously, the camera may display
[ ] and stop the recording to protect itself. Wait until the camera cools down.
Recording motion pictures is not possible.
•
You may not be able to record for a short while after turning this unit on when using a large
capacity card.
Motion picture recording stops in the middle.
•
When the ambient temperature is high or motion picture is recorded continuously, the camera
may display [ ] and stop the recording to protect itself. Wait until the camera cools down.
The screen may be blacked out momentarily, or the unit may record noise.
•
Depending on the environment at the time of motion picture recording, the screen may be
blacked out momentarily or the unit may record noise due to static electricity or powerful
electromagnetic waves (radio towers, high voltage power lines, etc.).
Sometimes it is difficult to focus with Auto Focus when recording 4K motion
pictures.
•
This phenomenon occurs when the camera is trying to record with highly accurate focus at a
reduced Auto Focus speed, and is not a malfunction.
] ([4K Burst]) or [ ]
(ENG) SQT0910
Others
53