Preparation/Basic
Front Dial/Rear Dial
Rotating:
Selection of items or setting of values is performed during the various settings.
•
These operating instructions describe operations of the front dial/rear dial as follows:
e.g.: When rotating
the front dial to the
left or right
Allows you to set the aperture, shutter speed, and other settings when in
modes.
Mode dial
•
In [Dial Set.] in the [Custom] menu, you can change the operation methods of the rear dial and
front dial.
Temporarily changing the items assigned to the front/rear dials ([Dial Operation
Switch])
You can temporarily change the items assigned to the front/rear dials using the function
button to which [Dial Operation Switch] is assigned.
[Dial Operation Switch] is assigned to [Fn11] at the time of purchase. (P23)
•
You can set the items to be assigned temporarily to the front/rear dials in [Dial Operation Switch
Setup] in [Dial Set.] in the [Custom] menu.
1
Press [Fn11].
•
A guide will be displayed showing the items temporarily
assigned to the front/rear dials.
2
Rotate the front/rear dials while the guide is
displayed.
•
The setting of the item assigned to the dial you have rotated will change. To change the
setting of the item assigned to the other dial, rotate it.
3
Press [MENU/SET] and set.
•
When the recording screen is displayed, the original assignment settings for the dials are
restored.
•
Items that are temporarily assigned to the front/rear dials can be used only while the guide
1
(step
) or setting screen (step
while making adjustments, the original assignment settings will be restored.
20
SQT0910 (ENG)
Front dial
Programme Shift
Aperture value
Shutter speed
Aperture value
2
) is displayed. If you display a menu or turn off the camera
e.g.: When rotating
the rear dial to the
left or right
Programme Shift
Aperture value
/
/
Rear Dial
Shutter speed
Shutter speed
0
/
WB
WB
WB
WB
ISO
ISO
ISO
ISO
98 98 98