Toptech TT-N-705 Installation Manual
  1. Manuals
  2. Brands
  3. Toptech Manuals
  4. Thermostat
  5. TT-N-705
  6. Installation manual

Toptech TT-N-705 Installation Manual

Hide thumbs
Table of Contents

Advertisement

Quick Links

This manual covers TopTech models:
TT-N-705 and T705
Thermostat Applications Guide
D
e
s
c
i r
t p
o i
n
Gas or Oil Heat
Electric Furnace
Heat Pump (No Aux. or Emergency Heat)
Heat Pump (with Aux. or Emergency Heat)
Multi-stage Systems
Heat Only Systems
Heat Only Systems - Floor or Wall Furnaces
Cool Only Systems
Millivolt

Table of Contents

Una versión española de este
manual puede ser descargada
en www.pro1iaq.com
® U.S. Registered Trademark. Patents pending.
Copyright © 2006 Pro1 IAQ, Inc. All rights reserved.
INSTALLATION MANUAL
Power Type
Battery Power
Hardwire (Common Wire)
Yes
Yes
Hardwire (Common Wire) with Battery Backup
Yes
No
No
Yes
Yes
Yes
Yes
Page
A trained, experienced technician
must install this product.
2
3
Carefully read these instructions. You
4
could damage this product or cause a
5
hazardous condition if you fail to follow
6
these instructions.
7
8
9
10
Need Help?
11
12
For assistance with this product please visit
http://www.pro1iaq.com or call Pro1
Customer Care toll-free at 888-Pro1iaq
(776-1427) during normal business hours
(Mon-Fri 9 AM - 6 PM Eastern)
1
Rev. 0850

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the TT-N-705 and is the answer not in the manual?

Questions and answers

Subscribe to Our Youtube Channel

Related Manuals for Toptech TT-N-705

Summary of Contents for Toptech TT-N-705

  • Page 1: Table Of Contents

    INSTALLATION MANUAL This manual covers TopTech models: TT-N-705 and T705 Power Type Thermostat Applications Guide Battery Power Hardwire (Common Wire) Gas or Oil Heat Electric Furnace Hardwire (Common Wire) with Battery Backup Heat Pump (No Aux. or Emergency Heat) Heat Pump (with Aux. or Emergency Heat)

  • Page 2: Installation Tips

    INSTALLATION TIPS Wall locations The thermostat should be installed approximately 4 to 5 feet above the floor. Select an area with average temperature and good air circulation. Do not install thermostat in locations: • Close to hot or cold air ducts •...

  • Page 3: Thermostat Quick Reference

    Getting to know your thermostat Displays the user Days of the selectable setpoint week and time temperature. Hold is displayed when Button thermostat program is options permanently overridden. System operation indicators: The COOL, HEAT or FAN icon will display when the COOL, HEAT or FAN is on.

  • Page 4: Subbase Installation

    SUBBASE INSTALLATION Caution: Mercury Notice: All of Pro1’s products are Electrical Hazard mercury free. However, if the Failure to disconnect the product you are replacing power before beginning to contains mercury, dispose of it install this product can cause properly. Your local waste electrical shock or equipment management authority can give damage.

  • Page 5: Wiring

    WIRING Caution: Electrical Hazard Warning: Failure to disconnect the power All components of the control before beginning to install this system and the thermostat product can cause electrical installation must conform to shock or equipment damage. Class II circuits per the NEC Code. Wiring If you are replacing a thermostat, make note of the terminal connections on the...

  • Page 6: Wiring Diagrams

    WIRING DIAGRAMS Power supply Factory-installed jumper. Remove only when installing on 2-transformer systems. Use either O or B terminals for changeover valve. Use a small piece of wire (not supplied) to connect W and Y terminals. Set fan operation switch to electric Optional 24 VAC common connection when thermostat is used in battery power mode.

  • Page 7: Technician Setup

    TECHNICIAN SETUP MENU Gas or Electric Setup Gas: For systems that control the fan during a call for heat, put the fan operation switch to the GAS position. Electric: The thermostat operation switch should be put in the ELEC position. This setting allows the thermostat to operate the fan when the fan relay is connected to the G terminal.

  • Page 8: Technician Setup Menu

    TECHNICIAN SETUP MENU Technician Setup Menu This thermostat has a technician setup menu Configure the installer options as desired using the table below. for easy installer configuration. To setup the thermostat for your particular application: Use the keys to change settings and the NEXT STEP Press MENU button or PREV STEP key to move from one option to another.

  • Page 9: Mounting And Battery Installation

    MOUNT THERMOSTAT & BATTERY INSTALLATION Mount Thermostat Align the 4 tabs on the subbase with corresponding slots on the back of the thermostat, then push gently until the thermostat snaps in place.

  • Page 10: Programming The Thermostat

    PROGRAMMING THE THERMOSTAT Set Time Follow the steps below to set the day of the week and current time: Press MENU Press SET TIME Day of the week will be flashing. Use the key to select the current day of the week. Press NEXT STEP The current hour is flashing.

  • Page 11: Programming The Thermostat (Cont)

    PROGRAMMING THE THERMOSTAT You can use the table below to plan your customized program schedule. Programming Table Setpoint Setpoint Day of the Temperature Temperature Events Time Week (Heat) (Cool) Weekday Wake Leave Return Sleep Saturday Wake Leave Return Sleep Sunday Wake Leave Return...

  • Page 12: Specifications

    SPECIFICATIONS & CONTACT INFORMATION Specifications The display range of temperature 41ºF to 95ºF (5ºC to 35ºC) 44ºF to 90ºF (7ºC to 32ºC) The control range of temperature Load rating 1 amp per terminal, 1.5 amp maximum all terminals combined Display accuracy ±...

This manual is also suitable for:

T705

Table of Contents