Toptech TT-N-751 Installation Manual
  1. Manuals
  2. Brands
  3. Toptech Manuals
  4. Thermostat
  5. TT-N-751
  6. Installation manual

Toptech TT-N-751 Installation Manual

Hide thumbs
1
2
3
4
5
6
7
8
9

Advertisement

Table of Contents

This manual covers TopTech models:
TT-N-751
Thermostat Applications Guide
D
e
s
c
i r
t p
o i
n
Gas or Oil Heat
Electric Furnace
Heat Pump (No Aux. or Emergency Heat)
Heat Pump (with Aux. or Emergency Heat)
Multi-stage Systems
Heat Only Systems
Cool Only Systems
Millivolt

Table of Contents

Una versión española de este
manual puede ser descargada
en http://toptech.pro1iaq.com
® U.S. Registered Trademark. Patents pending.
Copyright © 2010 Pro1 IAQ, Inc. All rights reserved.
INSTALLATION MANUAL
Power Type
Battery Power
Hardwire (Common Wire)
Yes
Yes
Hardwire (Common Wire) with Battery Backup
Yes
Yes
Yes
Yes
Yes
Yes
Page
A trained, experienced technician
must install this product.
2
3
Carefully read these instructions. You
4
could damage this product or cause a
5
hazardous condition if you fail to follow
6-7
these instructions.
8
9
Need Help?
For assistance with this product please
visit http://toptech.pro1iaq.com or call our
Customer Care Center toll-free at
1-888-776-1427 during normal business
hours (Mon-Fri 9 AM - 6 PM Eastern)
1
Rev. 1019

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the TT-N-751 and is the answer not in the manual?

Questions and answers

Subscribe to Our Youtube Channel

Related Manuals for Toptech TT-N-751

Summary of Contents for Toptech TT-N-751

  • Page 1: Table Of Contents

    INSTALLATION MANUAL This manual covers TopTech models: TT-N-751 Power Type Thermostat Applications Guide Battery Power Hardwire (Common Wire) Gas or Oil Heat Electric Furnace Hardwire (Common Wire) with Battery Backup Heat Pump (No Aux. or Emergency Heat) Heat Pump (with Aux. or Emergency Heat)

  • Page 2: Installation Tips

    • Where there might be concealed chimneys or pipes • Where appliances could radiate heat TopTech Tip Pick an installation location that is easy for the user to access. The temperature of the location should be representative of the building.

  • Page 3: Thermostat Quick Reference

    Universal Private Label Badge located on the front of the thermostat. Removing the dealer imprinting badge TopTech Tip All TopTech thermostats use the same universal magnetic badge. Visit our website at toptech.pro1iaq.com to learn more about our dealer imprinting programs...

  • Page 4: Subbase Installation

    SUBBASE INSTALLATION Caution: Mercury Notice: Electrical Hazard All of TopTech’s products are mercury free. However, if the Failure to disconnect the product you are replacing power before beginning to contains mercury, dispose of it install this product can cause properly. Your local waste...

  • Page 5: Wiring

    First stage of cool Second stage of cool Second stage of cool Second stage of cool & second stage of heat TopTech Tips: C terminal Note: The C (common wire) terminal does not In many systems with no emergency have to be connected when the thermostat is heat relay a jumper can be installed powered by batteries.

  • Page 6: Technician Setup Menu

    TECHNICIAN SETUP MENU Technician Setup Menu This thermostat has a technician setup menu Configure the installer options as desired using the table below. for easy installer configuration. To set up the thermostat for your particular application: Use the keys to Press MENU button change settings and the NEXT key to move from one option to the next.
  • Page 7 STEPS CONTINUED ON THE NEXT PAGE TopTech Tip The second stage will turn on at 2x the swing setting. The second stage will turn off when 1x the swing is reached. For example, if the swing setting is .8 degrees for heating and the thermostat is set at 70ºF, the first stage will turn on at approximately 69.2ºF.

  • Page 8: Mounting And Battery Installation

    MOUNT THERMOSTAT & BATTERY INSTALLATION Mount Thermostat Align the 4 tabs on the subbase with corresponding slots on the back of the thermostat, then push gently until the thermostat snaps in place. To insure a solid fit between Note: the thermostat and the subbase: mount subbase to flat wall use screws provided drywall anchors should be...

  • Page 9: Specifications

    Dimensions of thermostat 4.7”W x 4.4”H x 1.1”D TopTech by Pro1 1111 S. Glenstone Suite 2-100 Spring eld, MO 65804 Toll-free: 1-888-776-1427 Toll Number (Outside the USA): 330-821-3600 Web: http://toptech.pro1iaq.com Hours of Operation: Monday - Friday 9 AM - 6 PM Eastern...

Table of Contents