Antilock Brake System (Abs); Warning Light; Operate Pedal Light; Up-Shift Light - Chevrolet Spark 2016 User Manual

102 Instruments and Controls
If the light comes on while driving,
carefully pull off the road and stop.
The pedal may be harder to push or
may go closer to the floor. It may
take longer to stop. If the light is still
on, have the vehicle towed for
service. See Towing the
Vehicle 0 265.
Antilock Brake System
(ABS) Warning Light
This light comes on briefly when the
engine is started.
If it does not, have the vehicle
serviced by your dealer. If the
system is working normally, the
indicator light then goes off.
If the ABS light stays on, turn the
ignition off. If the light comes on
while driving, stop as soon as it is
safely possible and turn the ignition
off. Then start the engine again to
reset the system. If the ABS light
stays on, or comes on again while
driving, the vehicle needs service.
If the regular brake system warning
light is not on, the vehicle still has
brakes, but not antilock brakes.
If the regular brake system warning
light is also on, the vehicle does not
have antilock brakes and there is a
problem with the regular brakes.
See Brake System Warning

Light 0 101.

For vehicles with an uplevel Driver
Information Center (DIC), see Brake
System Messages 0 114 for all
brake-related DIC messages.

Operate Pedal Light

This light comes on when the clutch
pedal needs to be applied to start
the vehicle.

Up-Shift Light

The vehicle may have an up-shift
light.
When this light comes on, shift to
the next higher gear if weather,
road, and traffic conditions allow.

Power Steering Warning

Light
If equipped, this light comes on
briefly when the ignition is turned to
ON/RUN as a check to show it is
working.