Sanyo PLV-Z700 Service Manual page 20

Mechanical disassemblies
5
Main PWB shield plata(top) removal.
1. Remove the 9 screws-A(M3x6), remove the screw-B(M3x10) and remove the Shield plate
(Main board-top) .
6
Main PWB removal.
1. Remove the 3 screws (M3x6), remove the Main board and remove the Shield plate (Main board-BTM).
Heat sink sheet
Main board
Shield plate
(Main board BTM)
A
A
A
A
A
Caoution;
Do not lose the heat sink sheet.
Caoution;
Be carefull do not damage the
connector
- 20 -
A
A
B
A
A
Shield plate
(Main board TOP)