Understanding Your New Blood Glucose Kit; The Embrace No Code Blood Glucose Test Strip - embrace No Code Manual

Understanding Your New Blood Glucose Kit

The Embrace No Code Blood Glucose Test Strip

Contact Points
Insert this end to the test
strip port on the meter.
The Embrace Test Strips are glucose specific, biosensor-based test
strips that requires very little blood sample to quickly test glucose in
fresh capillary whole blood. The test results are plasma-calibrated for
an easy comparison to lab results, but maybe 10 to 15% higher then re-
sults obtained from whole-blood referenced blood glucose analysis.
The test strip is also equipped with under-fill detection to alert you when
there is not enough blood to perform a test, so you can be assured that
each reading you get is an accurate and meaningful result.
IMPORTANT:
• Immediately close the vial cap of the test strip bottle tightly after each
use. Keep unused test strips in their original bottle. DO NOT leave
any test strips outside the bottle while not in use.
• DO NOT reuse test strips. Test strips are for single use only.
• Carefully discard used test strips and lancets in proper waste con-
tainers.
Embrace N0 Code
Sampling End
Apply blood or control
solution here.
7