Advertisement
Quick Links
Download this manual
See also:
Owner's Manual
Reference Guide
Quick
Small & Simple!
Compact Blood Glucose Monitoring System
Note: Please read through your Meter User Manual before using this guide.
An Evolution in Affordable,
Quick Reference Guide
Quality Meter Technology.
Advertisement
Related Manuals for embrace EVO
Summary of Contents for embrace EVO
-
Page 1: Quick Reference Guide
Reference Guide Quick Small & Simple! Compact Blood Glucose Monitoring System Note: Please read through your Meter User Manual before using this guide. An Evolution in Affordable, Quick Reference Guide Quality Meter Technology. - Page 2 Note: Please refer to the Embrace EVO™ No Code instruction manual for more complete and detailed instructions and important safety warnings.
- Page 3 Understanding Your New Meter Back of the Embrace EVO™ No Code Meter Battery Compartment Holds one CR 2032 3V Lithium coin cell battery. Data Port Connect an Omnis Health data cable here to send data to a PC*. *purchased separately...
- Page 4 ” will appear on the screen before entering the main mode. If error messages (Err1, Err 3, etc) appear, see Solving Problems on page 55 of the Embrace EVO™ No Code instruction manual. Step 3 After a flashing test strip icon appears on the meter display screen, press “...
- Page 5 Hold the lancing device against the side of your fingertip and press the release button to create a puncture. For Testing on Palm and Forearm: Please refer to the Embrace EVO™ No Code instruction manual for more complete, detailed instructions and important safety warnings.
- Page 6 Testing Your Blood Glucose Gently bring the test strip and touch the drop of blood at a slight angle. The test strip acts like a straw to pull the blood in. Keep the test strip in the blood drop until the meter beeps to indicate the test strip has enough blood to test.
- Page 7 Problem Solving Description and Remedy Message The meter electronics or test strip is damaged • Replace the battery and turn on the meter again. • Remove the test strip and insert a new test strip again. • If problem persists, call us at 1-877-979-5454 between 8:00am and 8:00pm (eastern time), Monday through Friday.
- Page 8 Problem Solving Description and Remedy Message Test result is higher than 600 mg/dL Wash and dry your hands and repeat the test using a new test strip. If the result is still “HI, ” contact your physician or healthcare professional immediately. Test result is lower than 20 mg/dL Wash and dry your hands and repeat the test using a new test strip.
-
Page 9: Recalling Memory
Recalling Memory Turn on the meter by pressing and holding “ ” button. ™ The “ ” will appear on the screen, and then the meter will display the main mode. If error messages (Err 1, Err 3, etc) appear, see Solving Problems on page 51 for trouble shooting. - Page 10 Recalling Memory For 7-Day, 14-Day, or 30-Day Average results, continue to press the “ ” button until you see the 7-Day, 14-Day, or 30-Day Average icon according to your choice. When your 30-day average is displayed, you can press “ ” to go back to view your averages and stored readings.
Need help?
Do you have a question about the EVO and is the answer not in the manual?
Questions and answers