Hardware Installation; Attaching Antennas; Hardware Mounting Installation - ZyXEL Communications ZyAIR B-3000 Quick Installation Manual

LABEL
Enable VLAN Tagging
Management VLAN ID

7 Hardware Installation

7.1 Attaching Antennas

Follow the steps below to connect the supplied antennas.
Locate the antenna connectors on the sides of your ZyAIR.
5.
Screw the antennas clockwise onto the antenna connectors. The antennas should be perpendicular
6.
to the ground and parallel to each other.
Make sure the antennas are securely screwed onto the antenna connectors.

7.2 Hardware Mounting Installation

In general, the best location for the access point is at the center of your intended wireless coverage area. For
better performance, mount the ZyAIR high up free of obstructions.
ZyAIR B-3000 Intelligent Wireless LAN Access Point
Table9 VLAN
Select this check box to turn on VLAN tagging.
Enter a number from 1 to 255 to define this VLAN group. At least one device in
your network must belong to this VLAN group in order to manage the ZyAIR.
Figure 11 Attaching Antennas
DESCRIPTION
26