Lock System Management; Setup Management - Seiki SE24HD01UK User Manual

Lock System Management

1. Press the MENU button to display the main
menu. Press the
System in the main menu, then press the
or the OK button, it will highlight the first
option.
2. Use the 0-9 buttons to input a 4-digit
password to enter the Lock System menu.
3. Press the buttons to select the option you
want to adjust in Lock System menu.
4. Press the buttons to change the
following settings.
Lock System
Enter Password
Enable
Channel Locks
Parental Rating
Lock Keypad
New Password
Clear Lock
Move
Default password "0000".
If you change the password, be sure to
remember the new password! If you forget
the new password, press the master
password"8899".
Enter Password
To access the Lock System menu, you must
enter the password. Enter the default password
"0000" for the first time use.
Enable
The lock system is designed to prevent
accidental returning of the TV/losing channels
and prevent children watching unsuitable
programme.
The Lock System must be set to On for this
function to operate. If the Lock System is set to
On, a valid password must be entered when you
access Auto Scan / Manual Scan / Channel Edit
/First Time Setup.
Channel Locks
Channel Locks is designed to prevent children
watching unsuitable programmes. When a
channel is blocked, a valid password must be
entered.
Parental Rating
This function allows you to set up blocking
schemes to block specific channels and ratings.
Press the buttons to select an age rating:
None, 4-18.
buttons to select Lock
_ _ _ _
Off
None
Off
_ _ _ _
0~9: Input MENU: Return EXIT: Exit
Lock System Management
Lock Keypad
Key Lock is designed to prevent children from
pressing the buttons on the TV. The Lock
System must be set On for this function to
operate.
New Password
Use the 0-9 buttons to input the old password
and then input the new 4-digit password.
Re-enter new password for confirmation.
Clear Lock
Reset all the lock settings to the factory defaults.
5. Press the EXIT button to exit the menu.

Setup Management

OSD Language
1. Press the MENU button to display the main
menu. Press the
in the main menu, then press the
button, it will highlight the first option.
2. Press the buttons to select OSD
Language and then press the
to select your desired on-screen display
language.
OSD Language
Audio Language
Subtitle
Teletext
Blue Screen
Mode Setting
Time Settings
PVR Settings
Move AdjustM
3. Press the EXIT button to exit the menu.
BASIC FEATURES
buttons to select Setup
or the OK
buttons
Setup
English
On
Home Mode
ENU: Return EXIT: Exit
25