Initial Setup; General Operation - Seiki SE24HD01UK User Manual

Initial Setup

1. Connect one end of the RF coaxial cable to
the aerial socket on the wall and the other
end of the cable to the RF (75Ω) socket at
the rear left side of your TV.
2. Connect the mains cable to the mains socket
after you have completed all the connections.
3. Connect AC power cable. At this stage, the
TV switches to standby mode. The red LED
indicator will illuminate on the front panel of
the TV.
4. In standby mode, press the
top of the TV or the
control to turn the TV on. The red LED
indicator will turn blue.
5. The first time you turn the TV on, it will go
straight into First Time Setup menu. Press
the buttons to navigate the menu and
change the settings.
Tuner Type
OSD Language
Selects your desired language to be
displayed on the menu. The default
on-screen menu language is set as English.
Mode Setting
Selects your desired mode setting.
• Home Mode: Viewing at home.
• Store Mode: For store demo, the brightness
is higher than home mode.
Country
Selects the country where you will operate
the TV. The default country is set as UK.
Tuner Type
Selects the tuner type: Antenna / Cable.
Auto Scan
Selects the auto scan type: DTV+ATV / DTV
/ATV.
Start
Press the OK button to start auto tuning. Auto
Scan will commence. The display will show
the progress of the tuning and the number of
channels found.
Auto Scan
Scanning CH21
Digital Channels Found:
DTV :0 Radio :0 Data:0
button at the
button on the remote
Antenna
MENU: Stop EXIT: Exit
6. If you want to skip the DTV tuning, press the
MENU button to interrupt the tuning half way.

General Operation

Press the SOURCE button on the remote
control and select DTV to switch the TV to
Digital Terrestrial Television Broadcasting.
Information Banner
Whenever you change channel using the CH+/
CH- buttons or the number buttons, the TV
displays the broadcast picture along with an
information banner on the top left of the screen
(available only in DTV/ATV mode).
The information banner can be displayed at
any time while watching TV by pressing the
DISPLAY button on the remote control.
GETTING STARTED
13