System Limitations - BMW 2006 Z4 3.0i2006 Z4 3.0si Owner's Manual

Table of Contents

Advertisement

Malfunction
The warning lamp for the brake system
lights up in yellow. The drive-off assis-
tant has failed. The car will not be held
in place after the brake is released. Have the
system checked as soon as possible.
Flat Tire Monitor FTM
The concept
The Flat Tire Monitor monitors tire pressures
while the car is being driven. The system
reports any significant loss of pressure in one
tire in relation to another.
In the event of tire pressure loss, the rolling
radius of the tire changes, thereby affecting the
rotational speed of the wheels. This change is
detected, and a flat tire warning is issued to the
driver.
System requirements
To ensure a reliable flat tire warning, the system
must be initialized with the correct tire inflation
pressures.
The system must be reinitialized each
time a tire inflation pressure has been cor-
rected or a wheel or tire has been

System limitations

The Flat Tire Monitor is unable to warn
the driver of sudden, severe tire damage
caused by external factors, nor can it identify
the gradual loss of pressure that will inevitably
occur in all four tires over a lengthy period of
time.<
The system could issue a false warning or func-
tion in a delayed manner in the following situa-
tions:
>
System was not initialized
>
Driving on a snow-covered or slippery road
surface
>
Performance-oriented driving: slip at the
drive wheels, high levels of lateral accelera-
tion
>
Driving with snow chains attached
Online Edition for Part-No. 01 41 0 012 083 - © 04/06 BMW AG
Initializing the system
The initialization is completed while you
are driving, and can be interrupted at any
time. Initialization is continued automatically
when you continue driving.
When driving with snow chains, do not initialize
the
system.<
1.
Start the engine immediately before pulling
away, but do not drive off yet.
2.
Press the button until the yellow indicator
lamp in the instrument cluster lights up for a
few seconds.
3.
Drive off.
Initialization is completed during the drive,
without any feedback issued.
Flat tire warning
changed.<
cant loss of tire pressure.
1.
Cautiously reduce speed to 50 mph/
80 km/h or lower. Avoid strong braking and
steering maneuvers. Do not exceed a maxi-
mum speed of 50 mph/80 km/h.
dard equipment by design, do not continue
driving. Otherwise a severe accident could
result after a tire
2.
At the next opportunity, check the air pres-
sure in all four tires.
Tire Monitor was not initialized. In this case,
initialize the
The warning lamp in the instrument
cluster lights up in red. A signal also
sounds. There is a flat tire or a signifi-
If the car is not equipped with Run-
Flat Tires, refer to page 84, the stan-
puncture.<
If the inflation pressure is correct in all
four tires, it is possible that the Flat
system.<
51

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents