Vessel Alarms - Lowrance ELITE Ti Operator's Manual

102
Note:
Ú If the MOB function is already active, this will be
terminated and replaced by the new route towards the AIS
SART position!
Note:
Ú If the AIS stops receiving the AIS SART message, the
AIS SART remains in the Vessels list for 10 minutes after it
receives the last signal.
If you select the AIS SART icon on the chart panel, then you can see
the AIS MOB details.

Vessel alarms

You can define several alarms to alert you if a target shows up
within predefined range limits, or if a previously identified target is
lost.
Dangerous vessel
Controls whether an alarm will be activated when a vessel comes
within the predefined CPA or TCPA. Refer to "Defining dangerous vessels"
on page 104.
AIS vessel lost
Sets the range for lost vessels. If a vessel is lost within the set range,
an alarm occurs.
AIS | ELITE Ti Operator Manual