Acknowledging A Message; Alarms Dialog - Lowrance ELITE Ti Operator's Manual

106

Acknowledging a message

The following options are available in the alarm dialog for
acknowledging a message:
Close
•
Sets the alarm state to acknowledged, meaning that you are
aware of the alarm condition. The siren / buzzer stops and the
alarm dialog is removed.
However, the alarm remains active in the alarm listing until the
reason for the alarm has been removed.
Disable
•
Disables the current alarm setting. The alarm does not show
again unless you turn it back on in the Alarms dialog.
There is no time-out on the alarm message or siren. They remain
until you acknowledge the alarm or until the reason for the alarm is
removed.

Alarms dialog

All alarms are setup in the Alarms Settings dialog.
The alarm dialogs can also be activated from the Tools panel. The
alarm dialogs include information about active alarms and alarm
history.
Alarms | ELITE Ti Operator Manual