Behringer xr18 Product Manual page 38

38
X AIR User Manual
Stereo Tremolo
Stereo Tremolo creates an up and down volume change at a constant and even
tempo just like the guitar amps of yesteryear. Use the Stereo Tremolo to add a
unique "surf-music" texture to a vocal or instrument track.
SPEED adjusts the LFO rate and DEPTH sets the amount of modulation.
PHASE can be used to set an LFO phase difference between the left and right
channel, which can be used for panning effects. The WAVE knob blends the
LFO waveform between triangular and square shape. The signal envelope,
shaped by ATTACK, HOLD and RELEASE, can be used to modulate the LFO speed
(ENV SPEED) and the LFO modulation depth (ENV DEPTH).
Sub Octaver
The Sub Octaver provides two channels of sub harmonics generation, one or even
two octaves below the input signal.
Adjust the DIRECT knob to blend the "dry" signal with the lower octaves.
Use the RANGE switch to optimize the tracking by selecting the frequency
range of the input signal. The OCT1 and OCT2 knobs adjust how much
1 octave down and 2 octaves down content is included.
Delay + Chamber
Here we have combined Delay and Chamber reverb, so a single device can provide
a variety of delay settings, plus add just the right type and amount of reverb to
the selected signal. This device only uses one FX slot. (The Reverb is Inspired by
the Lexicon PCM 70)
Use the BALANCE knob to adjust the ratio between delay and reverb.
Low frequencies can be excluded with the LO CUT knob, and the MIX adjusts
how much of the effect is added to the signal. The TIME knob adjusts the delay
time for the left channel delay, and the PATTERN sets the delay ratio for the
right channel delay. Adjust the FEEDBACK and trim some high frequencies with
the FEED HC (high-cut) knob. The XFEED knob allows you to send the delay
sound to the reverb effect, so instead of running completely parallel, the reverb
affects the echos to a selected degree. The PREDELAY knob determines the
hesitation before the reverb affects the signal. The DECAY knob adjusts how
quickly the reverb fades. The SIZE controls how large or small the simulated
space is (room, cathedral, etc.). The DAMPING knob determines the decay of high
frequencies within the reverb tail.
Chorus + Chamber
Taking up only one FX slot, the Chorus + Chamber effect combines the shimmer
and doubling characteristics of a studio-grade Chorus with the sweet sound of a
traditional Chamber reverb. (Reverb is Inspired by the Lexicon PCM 70)
The BALANCE knob adjusts the balance between chorus and reverb.
Low frequencies can be excluded with the LO CUT knob, and the MIX knob adjusts
how much of the effect is added to the signal. SPEED, DELAY and DEPTH adjust
the rate, delay, and modulation depth of the chorus. The LFO PHASE between left
and right channel can be offset by up to 180 degrees, and WAVE adjusts the LFO
waveform from a sine wave to triangular wave. The PREDELAY knob determines
the hesitation before the reverb affects the signal. The DECAY knob adjusts how
quickly the reverb fades. The SIZE controls how large or small the simulated
space is (room, cathedral, etc.). The DAMPING knob determines the decay of high
frequencies within the reverb tail.
Flanger + Chamber
Add the mind-bending, filter-sweeping effect of a state-of-the-art Flanger to
the elegant sweetening of a traditional Chamber reverb — all in one FX slot.
(Reverb is Inspired by the Lexicon PCM 70)
The BALANCE knob adjusts the ratio between flanger and reverb. Low frequencies
can be excluded with the LO CUT knob, and the MIX knob adjusts how much
of the effect is added to the signal. SPEED, DELAY and DEPTH adjust the rate,
delay, and modulation depth of the flanger. FEEDback can be adjusted with
positive and negative amounts. The PHASE can be off set by up to 180 degrees.
The PREDELAY knob determines the hesitation before the reverb affects the
signal. The DECAY knob adjusts how quickly the reverb fades. The SIZE controls
how large or small the simulated space is (room, cathedral, etc.). The DAMPING
knob determines the decay of high frequencies within the reverb tail.
Delay + Chorus
This combination effect merges a user-definable Delay (echo) with a studio
quality Chorus sure to fatten up even the "skinniest" track. Uses only one FX slot.
(Inspired by the TC Electronic D-Two)