Network Connection; Ip Address And Dhcp; Ethernet/Lan; Wifi Client - Behringer xr18 Product Manual

14
X AIR User Manual

4. Network Connection

The X AIR mixers offer convenient digital control of the various mixing functions
in three different ways - via Ethernet LAN, or wirelessly as a Wifi Client or as an
Access Point. Selection is made with the REMOTE switch. You may view or change
the network preferences for these on any of the X AIR remote control applications
on the 'Setup/Network' page.

4.1 IP Address and DHCP

Depending on the connection scenario, the X AIR mixers offer up to 3 options
for connecting a tablet or PC for software control – DHCP Client, DHCP Server,
and fixed IP operation. Connection is achieved differently depending on
which option you choose:
DHCP Client mode is available in Ethernet LAN or Wifi Client operation.
The mixer will automatically request an IP lease from the DHCP server that
owns the IP addresses in the network to which you are trying to connect.
DHCP Server (DHCPS) is optionally available for Ethernet LAN connections and
is standard in Access Point operation. The mixer will own the IP addresses
and provide IP leases to devices requesting access to that network. The mixer
will always use IP address 192.168.1.1 and assign IP addresses 192.168.1.101 –
192.168.1.132 to its clients.
Static IP is available for Ethernet LAN and Wifi Client operation. The mixer will
use the fixed (static) IP address, subnet mask and gateway that you specify for
registering on the network. Make sure that the addresses you specify manually
are not conflicting with any other addresses on the same network. We generally
recommend using the DHCP mode, unless you have a very specific reason to set
it up manually.
Note: Changing parameters of the currently selected connection mode
will disconnect the software from the console. If the console is erroneously
configured for a fixed IP address that is incompatible with the network it is
connected to, the console will be inaccessible. In this case, one of the other
two connection modes can be used to regain access and amend the settings.
If that does not work, hold the Reset button for 2 seconds to return to default
network settings.
Mixer name and Ethernet setup screen

4.2 Ethernet/LAN

This mode supports DHCP Client (default), DHCP Server, and fixed IP operation.
Note that if the mixer is connected to a network where no DHCP server is
present, the mixer will generate an automatic IP address (range 169.254.1.0 –
169.254.254.255). There are no security options for LAN connections,
so any device in that network may take control of connected X AIR consoles.
When connecting via LAN/Ethernet to a Wifi router, make sure the security
settings of that router prevent unauthorized access.
Wifi Client setup screen

4.3 Wifi Client

This mode supports DHCP Client (default) and fixed IP operation. The X AIR mixers
can support WEP, WPA and WPA2 security mechanisms in Wifi Client mode and
works on Wifi channels 1-11.
Correct SSID (network name) and password need to be supplied to connect to an
existing network. WEP passwords have to be either 5 characters or 13 characters
long. If the supplied SSID and password are incorrect, the mixer cannot be
accessed. In this case the networking parameters have to be reset and another
connection mode has to be used to regain access.
The Ethernet connection mode may be used for configuration of the
Wifi Client mode. While being connected in Ethernet mode, the X AIR mixer can
scan the available wireless networks and display their SSID network names,
field strength and security method. By selecting the preferred wireless network,
this information can be copied to the applications' Wifi Client setup page
automatically. You will then be prompted to fill in the security password of that
network. After switching from Ethernet to Wifi Client mode, the mixer should
connect to the selected wireless network automatically, and will be displayed by
remote applications on any device connected to the same network.
Access Point setup screen