Drive Belt Adjustment - Polaris 2011 FS IQ Widetrak Owner's Manual

MAINTENANCE
Clutch System

Drive Belt Adjustment

Belt deflection should be adjusted without removing the clutch from the
jackshaft.
1. Loosen the 7/16" jam nut on the belt width adjuster.
2. Using a 1/8" Allen wrench, adjust the threaded set screw as needed.
Tip: Turn the set screw in (clockwise) to increase the distance between the
sheaves and out (counterclockwise) to decrease the distance.
3. Tighten the jam nut.
119