Download Print this page

General Safety Rules - Makita 6236DWAE Instruction Manual

Cordless driver drill equipped with electric brake
Hide thumbs Also See for 6236DWAE:


All Battery Operated Tools)
WARNING! Read and understand all instructions. Failure
follow all instructions listed below, may result
in electric
shock, fire and/or serious personal injury.
Work Area
Keep your work area clean and well lit. Cluttered benches and dark areas invite
not operate power tools in explosive atmospheres, such as in the presence
of flammable liquids, gases, or dust. Power tools create sparks which may ignite
the dust or fumes.
Keep bystanders, children, and visitors away while operating a power tool.
Distractions can cause you t o loose control.
Electrical Safety
A battery operated tool w i t h integral batteries or a separate battery pack must
be recharged only with the specified charger for the battery. A charger that
may be suitable for one type of battery may create a risk of fire when used with
ther battery.
Use battery operated tool only with specifically designated battery pack.
of any other batteries may create a risk of fire.
Personal Safety
Stay alert, watch what you are doing, and use common sense when operating
a power tool. Do not use tool while tired or under the influence of drugs, alcohol,
or medication. A moment of inattention while operating power tools may result
in serious personal injury.
Dress properly. Do not wear loose clothing or jewelry. Contain
hair. Keep
your hair, clothing, and gloves away from moving parts. Loose clothes, jewelry,
or long hair can be caught in moving parts.
Avoid accidental starting. Be sure switch is in the locked or o f f position before
inserting battery pack. Carrying tools with your finger on the switch or inserting
the battery pack into a tool with the switch on invites accidents.
Remove adjusting keys or switches before turning the tool on.
wrench or
a Ikey
that is left attached to a rotating part of the tool may result in personal injury.
Do not overreach. Keep proper footing and balance at all times. Proper footing
and balance enable better control of the tool in unexpected situations.
Use safety equipment. Always wear eye protection. Dust mask, non-skid safety
shoes, hard hat, or hearing protection must be used for appropriate conditions.



This manual is also suitable for: