radio sends a "channel/talkgroup request" to
the home repeater. The system then sends
back a "channel/talkgroup grant" to the user's
radio. The channel/talkgroup grant message
contains the number of a "go to" repeater to tell
the radio which repeater to use. This "go to"
repeater can be the same as the radio's home
repeater or another repeater in the system.
The radio uses the "go to" repeater for
transmission. Once the transmission has
ended, this repeater is available for other
users.
PM400 RADIO FEATURES
Radio-Wide Features
•
64 Conventional Channels
•
Up to 10 Sites and 100 Talkgroups
•
Up to 20 Repeaters per Site
•
8-Character Alphanumeric Display
•
4 Programmable Feature Buttons
•
2 Memory Channels
•
Telephone Interconnect
•
User-programmable Phone, Scan, and TPL/
DPL Lists
•
Option Board Expandability
•
Busy Channel Lockout
•
High/Low Power Settings
8
English
•
Transmit Time-Out Timer
•
Monitor and Sticky Permanent Monitor
•
System Scan with 2 Priority Levels and Revert
Scan
•
Companding Mode
•
Group Data Receive
LTR Trunked Features
•
MDC 1200 Signaling
- Selective Radio
- DOS
Inhibit Decode
- LTR Data Revert
- Radio Check
- Universal ID
Decode
- MDC Pre-Time
- PTT ID Encode/
Decode
Conventional Signaling Features
•
MDC 1200 Signaling
- Emergency Alert
- PTT ID Encode/
Encode
- Selective Radio
Inhibit Decode
Mode
Receive
Decode