Kenmore 146.16142210 Use & Care Manual page 20

Grill Head to Cart
□ This step requires two people to lift and position grill head onto cart.
□ Remove the tie wraps securing regulator hose to underside of grill head. Pull hose and igniter
□ Carefully lower the grill head onto the cart. Make sure the regulator hose and igniter wires
□ Align back rail holes with holes on side panels and firebox. Attach back rail with (4) M4x10
M6X13 screw
20 • 16142-40900319
wires out to side of grill head.
are hanging outside the cart. Open lid and attach head to cart with (4) M6x13 screws and
M6 compression washers.
screws.
Qty: 4 pcs M6 compression washer Qty: 4 pcs M4X10 screw Qty: 4 pcs