Set Squelch Level; Set Power Level - Motorola CM300 User Manual

SET SQUELCH LEVEL

Use this feature to filter out nuisance
(unwanted) calls and/or background noise.
However, tightening squelch could cause calls
from remote locations to be filtered out as well.
In this case, normal squelch may be more
desirable.
Press the preprogrammed Squelch button
(see page 14) to toggle between tight and
normal squelch.
– or –
D
1 to enter menu mode.
G H
2 or until
D
3 to select
G H
4 or until
D
5 to select
G H
6 or until
-or - until
7
SET POWER LEVEL B
Each channel in your radio has a predefined
transmit power level that can be changed.
• High power (S) allows you to reach a radio
that is farther away.
• Low power (R) to reach a radio within close
proximity.
Note: The R or S symbol appears on the
To set the power level, press the
UTILITY
preprogrammed Power Level button (see
page 14) to toggle between low and high
UTILITY
power.
SQUELCH
– or –
SQUELCH
1
NORMAL
2
TIGHT
3
D
to select the current setting.
display when High/Low Power Level is
selected.
D
to enter menu mode.
G H
UTILITY
or until
D
UTILITY
to select
49
English