Vox Operation; Program Pl/Dpl Codes - Motorola CM300 User Manual

VOX OPERATION

When hands-free operation is desired, your
radio can transmit by voice alone using the
VOX feature when you speak through a voice
activated external microphone that is
connected to your radio.
Note: A voice activated external microphone
must be connected to your radio prior
to power-up of the radio in order to
activate the VOX feature.
To enable or disable VOX operation on a
channel, press the preprogrammed VOX
button (see page 14).
Note: Pressing the PTT button disables VOX.
– or –
You can select channels to enable or disable
VOX as preprogrammed by your dealer/
programmer.
G H
1
or to select a channel that has been
preprogrammed to enable VOX.
Note: Pressing the PTT button disables
VOX.
G H
2 or to select a channel that has not
been preprogrammed to disable VOX.

PROGRAM PL/DPL CODES

Use this feature to edit the Private-Line/Digital
Private-Line codes for a selected channel.
D
1 to enter menu mode.
G H
2 or until
D
3 to select
G H
4 or until
– or – until
D
5 to select the current setting.
G H
6 or to scroll through the standard TPL
frequencies or DPL codes.
– or –
Enter a non-standard or standard 4-digit TPL
frequency or the 3-digit octal code (numbers
0-7 only) for DPL via the DTMF microphone
keypad.
D
7 to confirm selection.
C
8 until you exit menu mode.
EDIT PL
EDIT PL
RX XXX.X
TX XXX.X
21
English