Advertisement
AV-N29702
Measuring
Item
instrument
Signal
V-SIZE and
V-LINEARITY
generator
adjustment
Remote
control unit
Screen size
Screen
size 92%
Picture size 100%
H SIZE and
Signal
H POSITION
generator
adjustment
Remote
control unit
Screen size 90%
Screen
size
Picture size 100%
Signal
SIDE PIN and
CORNER PIN
generator
adjustment
Remote
control unit
Straight
24
Test point
Adjustment part
No.66 V SIZE
No.65 V LIN
Picture
size 100%
No.73 H SIZE
No.72 H POSI
Picture
size 100%
No.76 SIDE PIN
No.82 TOP PIN
No.84 BTM PIN
Straight
No. 51885
Description
Note:
Proceed to the following this adjustment after having completed the
adjustments of SUB BRIGHT and SUB CONTRAST.
1. Receive a crosshatch signal.
2. Select the No.66 V SIZE of the PICTURE MODE to squeeze the
laster.
3. Adjust the No.65 V LIN of the PICTURE MODE to be symmetrical.
4. Adjust the No.66 V SIZE until the vertical screen size is 92%.
Note:
Proceed to the following this adjustment after having completed the
adjustments of FOCUS, SUB BRIGHT, SUB CONTRAST, V CENTER,
TRAPEZIUM, V-SIZE and V-LINEARITY.
1. Receive a crosshatch signal.
2. Select the No.73 H SIZE of the PICTURE MODE.
3. Set the initial setting value of the No.73 H SIZE with the LEFT /
RIGHT key of the remote control unit.
4. Adjust the No.73 H SIZE until the horizontal screen size is 90%.
5. Adjust the No.72 H POSI until the screen will be horizontally centered.
Note:
Proceed to the following this adjustment after having completed the
adjustments of FOCUS, SUB BRIGHT, SUB CONTRAST, V CENTER,
TRAPEZIUM, V-SIZE and V-LINEARITY.
1. Receive a crosshatch signal.
2. Adjust such that vertical 2nd lines from left and right to be straight at
the No.76 SIDE PIN of the PICTURE MODE.
3. Adjust the end of vertical 2nd lines from left and right to be straight
at the No.82 TOP PIN and the No.84 BTM PIN of the PICTURE
MODE.
Advertisement
