Motorola and T6220 User Manual page 53

Symptom Try This:
Message not Confirm radios have the same channel and interference eliminator
received code settings.
Make sure
Reposition, replace, or recharge batteries.
If QuieT6000 feature is on, transmit call tone before talking.
If QuieT6000 feature is on, with only VibraCall selected, a
received call must be acknowleged by pressing any button (or a
VOX activation) before the radio can receive any incoming
transmissions.
Obstructions and operating indoors, or in vehicles, may interfere --
change location.
Verify that the radio is not in Scan mode.
Eavesdrop Reducer code is on, or setting does not match other
radios; all radios must use the same Eavesdrop Reducer code.
Heavy static or Radios are too close, they must be at least five feet apart.
interference
Radios are too far apart or obstacles interfering with transmission.
Talk range is up to two miles in clear, unobstructed conditions.
Channel and/or
Make sure menu is unlocked. Unlock by pressing
code locked
seconds.
is NOT being pressed while trying to listen.
M
for three
\
51