Table of Contents
Advertisement
SCAN
You can monitor multiple channels and receive
any calls that are transmitted on them.
Channels can be programmed into a scan list
by your dealer. Your radio automatically
switches to a scan list channel when it detects
activity on it.
STARTING OR STOPPING SCAN
The green LED indicator blinks during a scan
operation and stops blinking when the radio
switches to a channel.
You can start or stop a scan operation by:
1
To start or stop a scan operation, press the
preprogrammed Scan button (see page 13).
–or–
2
Select a channel that has been
preprogrammed by your dealer to start Auto
Scan.
Note:
You do not need to press a prepro-
grammed Scan button.
3
Select a channel that has not been
preprogrammed by your dealer to stop Auto
Scan.
TALKBACK
The Talkback feature allows you to respond to a
transmission while scanning. If transmission is
detected on a channel while scanning, the radio
will stop on that channel for a preprogrammed
period of time. During this "hangtime" you may
respond by pressing the PTT button.
Notes: If transmission ceases or if the PTT
button is not pressed for a prepro-
grammed duration, the radio continues
to scan. The LED scan indicator stops
blinking while the radio is in hangtime.
21
English
Hide quick links:
Advertisement
Table of Contents
