Connecting Your A/V Receiver, Vcr And High Definition Tv - Motorola HDT100 User Manual

Connecting your A/V Receiver, VCR and High Definition TV

1
Connect the component video cable supplied with the HDT100 to the
Y, Pb, and Pr connectors on your TV and HDT100.
2
Connect an optical digital audio cable to the
the HDT100 and the
OPTICAL
3
Connect a video cable to the
the / connector on the A/V receiver.
CABLE TV VIDEO
If your equipment supports it, S-Video connections may be used in
place of the standard composite video connections. In most cases,
S-Video offers a higher level of standard definition video quality than
composite video.
4
Connect a stereo audio cable to the
connectors on the A/V receiver and the
connectors on the stereo VCR.
When using the Digital Audio output (
baseband audio connections to the A/V receiver are not needed.
5
Connect a stereo audio cable to the
connectors on the stereo VCR and the
connectors on the A/V receiver.
6
Connect a video cable to the
VCR and the
VIDEO VCR OUT
7
Connect a video cable to the
VCR and the
VIDEO VCR IN
8
Connect a video cable to the
and the /
TV MONITOR OUTPUT VIDEO
To switch between viewing input from your VCR and input from your
HDT100, change your TV's video inputs.
OPTICAL
input connector on the A/V receiver.
connector on the HDT100 and
VIDEO
VCR AUDIO OUT R
INPUT AUDIO R
or
OPTICAL SPDIF
OUTPUT AUDIO OUT R
VCR AUDIO IN R
connector on the stereo
INPUT VIDEO
connector on the A/V receiver.
connector on the stereo
OUTPUT VIDEO
connector on the A/V receiver.
connector on the stereo TV
INPUT VIDEO
connector on the A/V receiver.
35
connector on
and
L
and
L
), the left / right
and
L
and
L