Raising The Antenna - Yamaha ysp-1600 Quick Reference Manual

1 2 3 4
❑
Unit installation position and surround sound effects
The unit achieves surround sound by reflecting sound beams off walls.
Effective surround effect may not be achieved in the following environment.
• Sound beams are blocked by obstacles such as furniture.
• The room size is not within the following dimensions;
Width: 3 meters to 7 meters (9.8 ft to 23 ft)
Depth: 3 meters to 7 meters (9.8 ft to 23 ft)
Height: 2 meters to 3.5 meters (6.6 ft to 11.5 ft)
• Listening position is too close to the unit.
• The unit is installed too close to the left or right wall.
• The unit is installed in the corner of the room.
• There is no wall for reflecting sound beam on the path of the sound beams.
• The optimum surround sound effect is achieved by setting a position according to the installation position of
the unit. For details, refer to "c Surround sound effect for the installation position" (p. 12).

Raising the antenna

Raise the antenna on the rear panel of the unit when connecting a wireless router
(access point) to use a network.
• Do not apply excessive force on the antenna. Doing so may damage it.
• Be sure to check the direction in which the antenna moves, and angle it in the proper direction.
• Do not remove the antenna.
• For details on the wireless connection, refer to page 32 in the Owner's Manual.
Hold the base of the
antenna while raising it
to its upright position.
a Installation 9
En