Advertisement
HX-i ADAPTER CABLE
1.
To use the HX-i cable with your smartphone or tablet, insert the TRRS (4-pin male) end of the
cable into your smartphone or tablet.
2.
If you are using the wireless microphone system, insert the STEREO (3-pin) end of the WR-PRO
receiver's output cable into the HX-i
3.
If you are using the SGM-990, insert the STEREO (3-pin) end of the output cable into the HX-i.
SPECIFICATIONS
SGM-990 SHOTGUN MICROPHONE
TYPE:
SENSITIVITY:
FREQUENCY RESPONSE: 100Hz—20kHZ
OUTPUT IMPEDANCE:
POWER SOURCE:
MAX SPL:
SIGNAL NOISE RATIO:
DIMENSIONS:
WEIGHT:
WM-PRO TRANSMITTER
TRANSMISSION FREQUENCY: F1—169.445MHz
MODULATION SYSTEM:
BATTERY:
POWER CONSUMPTION:
DIMENSIONS:
WEIGHT (including battery): 98g
MICROPHONE:
Electric Condenser (EX-503)
Super Cardioid Electret Condenser
-40dB (at 1kHz 1V/Pa)
LONG: 1.7kΩ
SHORT: 760Ω
DC1.5V AAA size battery
100dB
More than 60dB
ɸ18.2mm X 177mm
52g (not including the battery)
F2—170.245MHz
FM modulation
9V x 1
30mA
86(h) x 60(w) x 21.5(d)mm
POLAR PATTERN
WR-PRO RECEIVER
RECEPTION FREQUENCY: F1—169.445MHz
Double Superheterrodyne System
RECEPTION SENSITIVITY: 2µV at S/N 40dB
BATTERY:
POWER CONSUMPTION: 25mA
MONITOR OUTPUT:
(Load: 30Ω, Modfreq: 1KHz, Dev: ±7KHz)
MICROPHONE OUTPUT:
(Load: 10KΩ, Modfreq: 1KHz, Dev: ±7KHz,
Impedance: 300Ω)
DIMENSIONS: 86(h) X 60(w) X 21.5(d)mm
WEIGHT:
128g (including battery)
F2—170.245MHz
9V x 1 (not included)
Voltage: 1V
Voltage: 8mV
Advertisement
