Motorola DCT2000 User Manual page 13

INTRODUCTION
Item
TO TV/VCR
1
RF IN
2
TO RF IN
3
Removable plate
4
5 AUX AUDIO IN
6 COAX
7 CABLE IN
8 AUDIO OUT
9 VIDEO
TV Pass Card slot
10
Description
A coaxial output to connect the DCT2000 to the TV or VCR.
A coaxial input that is connected to the TO RF IN, see Connecting the DCT2000.
A coaxial input that directs the cable signal to other connections on the DCT2000.
This plate covers the location for an optional telephone module. Available if your service provider offers
telephone communication.
RCA audio inputs providing loop-through audio from auxiliary audio equipment.
A SPDIF RCA connector that provides Dolby Digital
electronic program guide.
A coaxial input for the incoming signal from the wall outlet.
Left/right audio outputs to connect the DCT2000 to a TV, VCR, or A/V receiver.
Composite video output to connect the DCT2000 to a TV, VCR, or A/V receiver.
This space is reserved for future use.
®
audio or PCM audio. The audio settings are defined in the
7