Exterior Lamps Off; Reminder; Headlamp High/Low-Beam; Changer - Cadillac XT5 2017 Owner's Manual

The high beams may not turn off
automatically if the system cannot
detect another vehicle's lamps
because of any of the following:
The other vehicle's lamps are
missing, damaged, obstructed
from view, or otherwise
undetected.
The other vehicle's lamps are
covered with dirt, snow, and/or
road spray.
The other vehicle's lamps cannot
be detected due to dense
exhaust, smoke, fog, snow, road
spray, mist, or other airborne
obstructions.
The vehicle's windshield is dirty,
cracked, or obstructed by
something that blocks the view
of the light sensor.
The vehicle is loaded such that
the front end points upward,
causing the light sensor to aim
high and not detect headlamps
and taillamps.
Driving on winding or hilly roads.
The automatic high-beam
headlamps may need to be disabled
if any of the above conditions exist.

Exterior Lamps Off

Reminder

A warning chime sounds if the driver
door is opened while the ignition is
off and the exterior lamps are on.
Headlamp High/
Low-Beam Changer
: Push the turn signal lever away
from you and release, to turn the
high beams on. To return to low
beams, push the lever again or pull
it toward you and release.
This indicator light turns on in the
instrument cluster when the
high-beam headlamps are on.
Lighting

Flash-to-Pass

To flash the high beams, pull the
turn signal lever toward you, and
release.

Daytime Running

Lamps (DRL)

DRL can make it easier for others to
see the front of your vehicle during
the day. Fully functional DRL are
required on all vehicles first sold in
Canada.
The dedicated DRL will come on
when all of the following conditions
are met:
The ignition is on.
The exterior lamp control is
in AUTO.
The light sensor determines it is
daytime.
The parking brake is released or
the vehicle is not in P (Park).
When the DRL are on, the taillamps,
sidemarker lamps, and other lamps
will not be on.
167