Table of Contents
Advertisement
ACTIVATING THE REMOTE CONTROL
Remove the plastic insulator tag sticking out of the Battery Compartment of
the Remote Control by pulling on it. Once the tag is removed, the Remote
Control will be ready for use.
BATTERY CARE
1.
If the unit is not to be used for an extended period of time, remove the
battery. An old or leaking battery can cause damage to the Remote Control.
2.
Do not dispose of batteries in fire, batteries may explode or leak.
BATTERY REPLACEMENT
When the battery becomes weak, the operating
distance of the Remote Control is greatly reduced
and you will need to replace the Lithium battery.
1.
Remove the battery compartment from bottom
of the Remote Control.
2.
Install one 3V
with the positive side facing up.
3.
Replace the battery compartment.
IMPORTANT: Be sure that the battery is installed correctly. Wrong polarity may
damage the Remote Control and void the warranty.
DO NOT INGEST BATTERY, CHEMICAL BURN HAZARD
The remote control supplied with this product contains a coin/button cell
battery.
If the coin/button cell battery is swallowed, it can cause severe
internal burns in just 2 hours and can lead to death.
Keep new and used batteries away from children. If the battery compartment
does not close securely, stop using the product and keep it away from children.
If you think batteries might have been swallowed or placed inside any part of
the body, seek immediate medical attention.
To use the buttons on the Remote Control
Buttons on the remote control and the main unit with identical indications have
the same functions.
Operating the Remote Control
Normal operating distance for the remote is 15 ~ 20 feet (4.6 ~ 6m) from the
unit and at an angle of no more than 60º.
Notes:
"CR2025" Lithium battery
WARNING
E-8
Advertisement
Table of Contents
