Line Out Operation; Using Headphones; Care And Maintenance - Jensen CD-750 User Manual

Portable am/fm stereo cd mp3 encoder/player
Hide thumbs Also See for CD-750:
Table of Contents

Advertisement

You can connect CD-750 to an external Hi-Fi system by connecting the LINE
OUT Jacks (22) on the back of CD-750 to the AUX IN Socket of your Hi-Fi
system with RCA cables (Not included).
Remark: The sound from the CD-750 built-in speakers will not be disabled
when using the LINE OUT socket. Once you connect CD-750 to an external
Hi-Fi system, turn the volume of CD-750 to minimum if you prefer to only hear
the sound through your Hi-Fi system.
Inserting the plug of your headphones into the Headphone Jack will enable
you to listen in private. When using headphones, the speakers of CD-750 will
be disconnected automatically.
READ
THIS
IMPORTANT
HEADPHONES
1.
Avoid extended play at very high volume as it may impair your hearing.
2.
If you experience ringing in your ears, reduce the volume or shut off your
unit.
3.
Keep the volume at a reasonable level even if your headset is an open-
air type designed to allow you to hear outside sounds. Please note that
excessively high volume may still block outside sounds.
1.
Before cleaning unplug the unit. Clean your unit with a damp (never wet)
cloth. Solvent or detergent should never be used.
2.
Avoid leaving your unit in direct sunlight or in hot, humid or dusty places.
3.
Keep your unit away from heating appliances and sources of electrical
noise such as fluorescent lamps or motors.
4.
If drop-outs or interruptions occur in the music
during CD play, or if the CD fails to play at all, its
bottom surface may require cleaning. Before
playing, wipe the disc from the center outwards
with a good soft cleaning cloth.

LINE OUT OPERATION

USING HEADPHONES

INFORMATION

CARE AND MAINTENANCE

BEFORE
E-16
USING
YOUR

Advertisement

Table of Contents
loading

Table of Contents