Functions - Canon CanoScan 9900F Service Manual

C. Functions
1. USB Information (Windows only)
Information of the scanner connected to the USB port on the PC is displayed. If
communication between the scanner and the host computer fails, no information will be
displayed.
2. Scanner Information
Control program of CanoScan 9900F connected to the PC is displayed. If communication
between the scanner and the host computer fails, no information will be displayed.
3. Scanner Self Test
CanoScan 9900F self test is executed.
4. Scan
An image is scanned at any resolution and saved as an image file in the folder of Canon
Scanner Test.
5. Film Scan
Scann 35mm sleeve negative film by FAU lamp and scann it by IR LED with FARE function.
Save the two scanned images files in the folder of Canon Scanner Test. Scann one frame at
upper right in the sleeve film holder with resolution fixed at 1600dpi.
Note: Calibration cannnot be used with CanoScan 9900F. (Calibration function is in light
gray and unable to click it. )
COPYRIGHT 2003 CANON INC. CANOSCAN 9900F REV.0 FEB. 2003 PRINTED IN JAPAN (IMPRIME AU JAPON)
CHAPTER 5
5 - 7