Malfunction Display And Solutions; Technical Specifications - RCA RPW160 Instruction Manual

Malfunction display and solutions

When the washer is in trouble, please contact local service office or the sales service
department of our company and the customer should not dismantle the machine
without permission.
If the washer can not work normally, and the abnormal indication is shown in the digital
display window or the machine alarms, please check and correct as follows.
Fault Cause of fault
Water injection for about
Alarm for
16 minutes, but do not
water inlet
reach preset water level
Open the lid after starting
the delay time. Open the lid
Alarm for
when the washer is spinning.
opening lid
Open the lid when entering
into the child lock state.
Imbalance
alarm
After draining for 4
minutes, does not finish
Drain alarm
draining.
Water level is higher than
overflow alarm
rated overflow level
Note:
1: alarm removed, the return to the status before the alarm; E3 failures appear in the same trip.
2: overflow alarm, automatic water drain valve open until the manual intervention contact failure.

Technical specifications

515X525X938
Current
3.0A
value
120
60
Alarm of the
Indication Stopping alarm
buzzing sound
"E1" flares, and
other lights are
turned off.
"E2" flares, and
other lights are
turned off.
"E3" flares, and
other lights are
turned off.
"E4" flares, and
other lights are
turned off.
"E5" flares, and
Power off,
All water lever
repair
lights flash .
31kg
1.6Cu.ft 1.68Cu.ft
Drum Size
18