Page 1
Robert Bosch GmbH Power Tools Division 70745 Leinfelden-Echterdingen GKS 36 V-LI Professional www.bosch-pt.com 1 609 929 P97 (2008.02) O / 350 de Originalbetriebsanleitung el Πρωτότυπο οδηγιών χρήσης ro Instrucţiuni de folosire en Original instructions tr Orijinal işletme talimat originale fr Notice originale pl Instrukcją...
Page 2
GKS 36 V-LI Professional 1 609 929 P97 | (20.2.08) Bosch Power Tools...
Keep your hair, clothing Damaged or entangled cords increase the and gloves away from moving parts. risk of electric shock. Loose clothes, jewellery or long hair can be caught in moving parts. Bosch Power Tools 1 609 929 P97 | (20.2.08)
Use of the power tool for piece. operations different from those intended could result in a hazardous situation. 1 609 929 P97 | (20.2.08) Bosch Power Tools...
Page 7
Do not operate the saw if lower guard does not move freely and close instantly. Never clamp or tie the lower guard into the open position. If saw is acci- Bosch Power Tools 1 609 929 P97 | (20.2.08)
Use the battery only in conjunction with Contact with electric lines can lead to fire your Bosch power tool. This measure alone and electric shock. Damaging a gas line can protects the battery against dangerous over- lead to explosion.
Working ferrous metals is not permitted. cluded as standard delivery. Product Features Technical Data The numbering of the product features refers to Circular Saw GKS 36 V-LI the illustration of the machine on the graphics Professional page. Article number 3 601 F73 ...
EN 60745. Typically the A-weighted noise levels of the product are: Sound pressure level 98 dB(A); Sound power level 109 dB(A). Uncertainty 28.01.2008, Robert Bosch GmbH, Power Tools Division K =1.5 dB. D-70745 Leinfelden-Echterdingen Wear hearing protection! Vibration total values (triax vector sum) deter-...
Page 11
– Clean the saw blade 22 and all clamping LEDs go out again approx. 5 minutes after the parts to be assembled. battery has been fully charged. – Tilt back the retracting blade guard 10 and hold firmly. Bosch Power Tools 1 609 929 P97 | (20.2.08)
9; for a larger cutting depth, push the saw country for the materials to be worked. toward the base plate 9. Adjust the desired cut- ting depth at the cutting-depth scale. Tighten the clamping lever 30 again. 1 609 929 P97 | (20.2.08) Bosch Power Tools...
Inserting the Battery the optimal temperature range again. Use only original Bosch lithium ion batter- Temperature control of the power tool electron- ies with the voltage listed on the nameplate ics: of your power tool.
When the power tool is hung, pay attention should be carried out by an after-sales service that the saw blade is protected against ac- centre for Bosch power tools. cidental touching. Danger of injury. 1 609 929 P97 | (20.2.08)
Page 15
English | 29 In all correspondence and spare parts order, Australia, New Zealand and Pacific Islands please always include the 10-digit article Robert Bosch Australia Pty. Ltd. number given on the type plate of the machine. Power Tools Locked Bag 66...
Page 16
Defective or dead out battery packs/batteries must be recycled according the guideline 91/157/EEC. Batteries no longer suitable for use can be directly returned at: Great Britain Robert Bosch Ltd. (B.S.C.) P.O. Box 98 Broadwater Park North Orbital Road Denham Uxbridge UB 9 5HJ Tel.