957_book_2ATT ill at margins
Indicates RINGER is off.
Temporary Tone Dialing
If you have dial pulse (rotary) service, you can change from dial pulse to touch
tone dialing during a call by pressing *. This is useful if you need to send
touch tone signals for access to telephone banking or long distance services.
1 Dial the number.
2 Press *. Buttons pressed after this send touch tone signals.
3 After you hang up, the phone automatically returns to dial pulse service.
11/16/00
1:39 PM
Page 13
TELEPHONE OPERATION
phone on this line is in use.
K, then press R to
Using the Speakerphone
Press to make, answer, or end
NOTE: To switch from speakerphone
to handset, lift handset. To switch
from handset to speakerphone, press
K, then replace the handset.
Flashes when a call is
coming in, flashes quickly
when a call is on hold,
remains steady when any
Ringer Volume
Adjust RINGER volume
LO
HI
(
or
) or turn
RINGER
OFF
Press to dial number
displayed on screen (see
CALLER ID OPERATION).
Redial
Lift the handset or press
call the last number dialed.
Adjust Handset or
Speaker Volume
Press to adjust volume.
a speakerphone call.
.
13