Setting The Clock And Date - Motorola Ultra Express 6881023B75-A(X) User Manual

Setting the Clock and Date

Setting the Clock:
Press and release \ until
[
Press
Press and release \ to set the correct hour digits.
[
Press
Press and release \ to set the correct minutes.
[
Press
[
Press
Repeat steps 5 and 6 to set your pager for A.M./P.M.
and the 12/24 hour mode.
]
Press
to the standby screen. The time and date are displayed.
Note: When adjusting any of the time and date fields, press
and hold the \ to fast-forward to your selection. To skip a
field, press and release
For example, if you only need to change the 12 Hour setting,
press and release \ until
press and release
After performing any pager functions described in this
manual, your ULTRA Express pager automatically returns
to the standby mode and your selections are activated; or
]
press twice to return to the standby mode and activate
your selections.
4
. The hour digits begin to flash.
E
11:28a
Example of a set-time screen
. The first digit of the minutes begins to flash.
again to move to the next minutes digit
. The A.M./P.M. indicator begins to flash.
twice or allow the pager to automatically return
[
[
until 1
set time ?
until you reach the desired field.
set time ?
2 hours
is displayed.
is displayed, then
begins to flash.
.