Advertisement
ö
Automatic turn on/off feature activated
ó Low-battery indicator
e e
Errored data indicator
TURNING YOUR PAGER ON AND OFF
To turn your pager on:
Press W . An alert indicator in the upper left-hand
corner indicates that the pager is on and ready to
receive messages.
When the pager is on and no activity is taking
place, the standby screen is displayed as shown
below.
Example of Standby screen (pager on)
To turn your pager off:
Press U until
TURN PAGER OFF ?
Press Q.
The time of day and the date are still displayed on
your pager even when it is off.
Example of Standby screen (pager off)
SETTING THE INCOMING MESSAGE ALERT
You can set your pager to alert with either an audi-
ble (pleasing alert), a vibrate (vibration with no
beep tone), or a chirp alert (short beep tone).
Press U until
SET ALERT MODE ?
Press Q.
Press U until your choice is displayed.
Press Q or W. The alert mode indicator is dis-
played in the upper left-hand corner of the
screen.
The choices are either
AUDIBLE
([) which is silent.
VIBRATOR
SETTING YOUR PAGER'S PLEASING ALERTS
You can set your Memo EXPRESS pager to alert
with one of four musical alerts or one standard
beep alert.
NOTE: Your pager's incoming message alert
mode must be set to AUDIBLE to choose one of
the pleasing alerts.
Press U until
SET ALERTS ?
is displayed.
Press Q. The current setting is displayed.
Press U until your choice of
ALERT 3
,
ALERT 4
, or
ALERT 5
Press W to return to the standby screen.
is displayed.
3
is displayed.
D
(S),
CHIRP
(
), or
ALERT 1
,
ALERT 2
,
is displayed.
5
SETTING THE CLOCK AND THE DATE
Press U until
is displayed.
SET TIME ?
Press Q. The hour digits begin to flash.
Example of Set Time screen
Press U repeatedly to set the correct hour
digits.
Press Q. The minute digits begin to flash.
Press U repeatedly to set the correct minutes.
Press Q. The A.M./P.M. field begins to flash.
Repeat Steps 5 and 6 to set your pager for
A.M./P.M., 12/24 hour, and the date.
Press W or allow the pager to automatically re-
turn to the standby screen. The time and the
date are displayed.
NOTES: When adjusting any of the time and date
fields, press and hold U to fast-forward to your
selection. To skip a field, press Q repeatedly until
you get to the desired field. For example, if you
only need to change the date, press U until
TIME ?
is displayed. Then press Q repeatedly un-
til the date digits begin to flash.
4
READ MODE
This feature allows you to choose the most com-
fortable way to view messages.
Press U until
SET READ MODE ?
Press Q.
Press U repeatedly until your choice of
BY LINE
,
SCROLL 1
,
SCROLL 2
displayed.
In the LINE BY LINE mode, each screen of a
message is displayed for two seconds.
In the SCROLL mode, messages automatically
scroll across the screen until the entire mes-
sage is displayed.
SCROLL 1
(medium), and
(fast) set the speed at
SCROLL 3
which the message is displayed.
Press Q or W.
NOTE: Read messages line-by-line when operat-
ing your pager at temperatures below freezing.
READING MESSAGES
When a message is received, the pager alerts
with an audible or a vibrate alert and a flashing
message indicator (À).
Press any button to stop the alert.
Press W to display the message. If there are
additional message screens, B is displayed.
Example of Read screen with
message continuation indicator
6
SET
is displayed.
LINE
, or
SCROLL 3
is
(slow),
SCROLL 2
Advertisement
