Program Playback - Panasonic SC-AKX58 Operating Instructions Manual

Program playback

CD USB MEMORY
This function allows you to program up to 24 tracks.
1
Press [PROGRAM] in the stop mode.
"PGM" is shown.
2
CD
Press the alphanumeric buttons to select the track.
Do this step again to program other tracks.
For MP3:
1. Press [R, T] to select the album.
2. Press [6] and then press the alphanumeric
buttons to select the track.
3. Press [OK].
Do these steps again to program other tracks.
3
Press [4/9] to start playback.
Cancel program
mode
Check program
contents
Clear the last track Press [DEL] in the stop mode.
Clear all
programmed
tracks
Note:
• You cannot use program playback together with
"PLAYMODE" function.
• The program memory is cleared when you open the disc
tray.
12
Press [PROGRAM] in the stop
mode.
Press [2] or [6] when "PGM" is
shown in the stop mode.
Press [8] in the stop mode.
"CLR ALL" is shown.
Press [8] again.
Title search
MEMORY
You can search for the desired track in the internal
memory with title search.
1
Press [TITLE SEARCH].
" " blinks.
2
Press the alphanumeric buttons or [R, T] to select
the character then press [U] to select next
character.
To delete a character, press [DEL].
3
Press [OK].
Press [Y, U] to search for previous or next match.
"NOTFOUND" is shown if there is no match.
4
Press [OK] to confirm and play the track.
To cancel, press [TITLE SEARCH].
Note:
• This function skip tracks that are created with analog
recording (Z"Analog recording").
• This function does not work with random or program
playback.
• The character is not case sensitive.
• A same track title display will be shown for tracks with the
same title.