Updating The Bios - Dell Latitude E7250 Owner's Manual

Option
Wireless Device Enable
Table 12. Maintenance
Option
Service Tag
Asset Tag
Table 13. System Logs
Option
BIOS events
Thermal Events
Power Events

Updating the BIOS

It is recommended to update your BIOS (system setup), on replacing the system board or if an update is
available. For laptops, ensure that your computer battery is fully charged and connected to a power
outlet
1. Re-start the computer.
2. Go to dell.com/support.
3. Enter the Service Tag or Express Service Code and click Submit.
NOTE: To locate the Service Tag, click Where is my Service Tag?
NOTE: If you cannot find your Service Tag, click Detect My Product. Proceed with the
instructions on screen.
4. If you are unable to locate or find the Service Tag, click the Product Category of your computer.
5. Choose the Product Type from the list.
6. Select your computer model and the Product Support page of your computer appears.
7. Click Get drivers and click View All Drivers.
42
Description
• GPS (on WWAN Module)
All options are enabled by default.
Allows you to enable or disable the wireless devices. The options are:
• WWAN
• Bluetooth
• WLAN/WiGig
All options are enabled by default.
Description
Displays the service tag of your computer.
Allows you to create a system asset tag if an asset tag is not already set.
This option is not set by default.
Description
Displays the system event log and allows you to clear the log.
• Clear Log
Displays the thermal event log and allows you to clear the log.
• Clear Log
Displays the power event log and allows you to clear the log.
• Clear Log