Step 2: Setting The Time; Step 3: Presetting Radio Stations - Sony MHC-GR8000 Operating Instructions Manual

Step 2: Setting the
time
You must set the time before using the timer
functions.
1
0 )
1
Press CLOCK/TIMER SET.
The hour indication flashes.
2
Turn the jog dial to set the hour.
The clock is on a 12-hour system.
3
Press ENTER/NEXT.
The minute indication flashes.
4
Turn the jog dial to set the minute.
5
Press ENTER/NEXT.
The clock starts working.
Tips
• If you've made a mistake, start over from step 1.
• Setting the time deactivates the demo mode .
If you want to display the demo mode, press
DISPLAY/DEMO when the power is off.
Note
When setting the time, set the equalizer display to
anything other than Spectrum analyzer pattern 3.
(See "To change the equalizer display" on page 29.)
6
2,4 3,5
π
·∏
§
Step 3: Presetting
radio stations
You can preset up to 40 stations, 20 for FM, 10
for MW and 10 for SW. For Latin American
models, you can preset up to 30 stations, 20
for FM and 10 for AM.
3,5
POWER
0 )
1
Press TUNER/BAND repeatedly
until the band you want appears in
the display.
Every time you press this button, the
band changes as follows:
Latin American models:
FM ˜ AM
Other models:
FM n MW n SW
2
Press TUNING MODE repeatedly to
select "AUTO".
6 2 1 4
π
·∏
§