Table of Contents
Advertisement
You can tap
at any time for the Information page to review
the Product Tour.
SLEEP TRACKER
With the sleep tracking feature and vibration detection by your mobile device, the
application can monitor your sleep status for analysis and improvement of your
sleep quality.
Your mobile device will need to charge the whole night. Please place the mobile
device face down beside your pillow, where it can detect your movements. For more
details, please browse the product tour of the application.
DEREGISTER FROM THE APPLICATION
You must deregister the current main unit from the application before registering another one.
To disconnect from your current application, follow the steps below:
1. Tap
icon.
2. Tap Forget ID.
3. Tap RESET to erase the current ID memory in the application and the connection will be
interrupted immediately.
TROUBLESHOOTING
Problem
The main unit does not work.
The main unit does not work.
When setting functions, the
unit does not respond.
No sound when the alarm
goes on.
Alarm did not activate today,
but it did yesterday
Possible
cause
Power supply
Ensure plug has been firmly plugged into the
wall socket, not controlled by wall switch.
Ensure there is no power failure.
Press RESET at the rear of the main unit.
Normal use
Check the connection with the mobile device.
Normal use
Connect the power adapter again or press
RESET at the rear of the main unit.
The appliance will then be reset to factory
default settings.
Alarm function
Ensure alarm icon is displayed on display
disabled
screen. If OFF is displayed, press ALARM to
enable.
Alarm function
Ensure you select the correct alarm time
format, AM/PM.
disabled
Check the power connection for the possibility
of a power failure.
Solutions/Remarks
Advertisement
Table of Contents
