Advertisement
MAINTAINING YOUR DRILL PRESS
For your own safety, turn the switch OFF and remove the
plugfrom the power source outlet before maintaining or
lubricating your drill Press.
Frbquently blow out using an air compressor or dust
vacuum, any dust that accumulates inside the motor.
A coat of automotive paste wax applied to the table and
column will help to keep the surfaces clean.
To avoid shock or fire hazard, if the power cord is worn
or cut in any way, have it replaced immediately'
LUBRICATION
All of the drill press ball bearings are packed with grease
at the factory. They require no further lubrication'
Periodically lubricate the gear and rack, table elevation
mecnanism of the spindle inO ttre rack (teeth) of the quill'
I
i
Advertisement
