Indicator
Name
System Message
Indicator
*
U.S.
Brake System
Canada
Indicator (Amber)
(Amber)
*1:Models with the smart entry system have an ENGINE START/STOP button instead of an ignition switch.
* Not available on all models
On/Blinking
Comes on for a few seconds when
●
you turn the ignition switch to ON
(
w
*1
, then goes off.
Comes on along with a beep when a
●
problem is detected. A system
message on the multi-information
display appears at the same time.
Comes on for a few seconds when
●
you turn the ignition switch to ON
(
w
*1
, then goes off.
Comes on if there is a problem with a
●
system related to braking other than
the conventional brake system.
Explanation
While the indicator is on, press the
●
(information) button to see the message
again.
Refer to the Indicators information in this
●
chapter when a system message appears on
the multi-information display. Take the
appropriate action for the message.
The multi-information display does not
●
return to the normal screen unless the
warning is canceled, or the
pressed.
Comes on while driving - Have your
●
vehicle checked by a dealer.
With this indicator on, your vehicle still has
●
normal braking ability.
uuIndicatorsu
Message
*
—
button is
U.S.
Canada
Continued
81