Honda 2016 CR-V Owner's Manual page 72

Indicator Name
Malfunction
Indicator Lamp
Charging System
Indicator
Shift Lever
Position Indicator
*1:Models with the smart entry system have an ENGINE START/STOP button instead of an ignition switch.
* Not available on all models
On/Blinking
Comes on when you turn the ignition
●
switch to ON *1 , and goes off
w (
when the engine starts, or after
several seconds if the engine did not
start. If "readiness codes" have not
been set, it blinks five times before it
goes off.
Comes on if there is a problem with
●
the emissions control systems.
Blinks when a misfire in the engine's
●
cylinders is detected.
Comes on when you turn the ignition
●
switch to ON w ( *1 , and goes off
when the engine starts.
Comes on when the battery is not
●
charging.
Indicates the current shift lever
●
position.
Explanation
Readiness codes are part of the on board
●
diagnostics for the emissions control
systems.
2 Testing of Readiness Codes P. 525
Comes on while driving - Have your
●
vehicle checked by a dealer.
Blinks while driving - Stop in a safe place
●
where there are no flammable objects. Stop
the engine for 10 minutes or more, and wait
for it to cool down. Then, take your vehicle
to a dealer.
2 If the Malfunction Indicator Lamp
Comes On or Blinks P. 510
Comes on while driving - Turn off the
●
heating and cooling system
system * and rear defogger to reduce
electricity consumption.
2 If the Charging System Indicator Comes
On P. 509
2 Shifting P. 372
uuIndicatorsu
Message
* /climate control
—
Continued
*
71